Screen Replacement Compatible iPhone 7 Black 4.7inch Digitizer Repair LCD replacement Kit screen assembly
Free Shipping Included! Screen Replacement Compatible iPhone 7 Black 4.7inch Digitizer Repair LCD replacement Kit screen assembly by Milemont at Amader SMS. MPN: 7BSCR. Hurry! Limited time offer. Offer valid only while supplies last. Attention PleaseLook for a professional person to install the screenRefer to the installation tutorial on this page (Related Video Shorts)Test the
Look for a professional person to install the screen
Refer to the installation tutorial on this page (Related Video Shorts)
Test the screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again.
Confirm the phone is power off before installation.
Do not press the left and upper corners of the screen, otherwise may cause lines on the screen.
Each screw should be installed into original location, because they are not same length! Never tighten screw over limit!
Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage!
If you meet with these issues
Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc.
Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.
1* iPhone 7 4.7inch black LCD screen
1* 3M waterproof Seal
1* installation manual
1 * Premium ☆ Screwdriver (0.8 x 25mm)
1 * Premium + Screwdriver (1.3 x 25mm)
1 * Premium Y Screwdriver (0.6 x 25mm)
1 * anti-static tweezers
1 * Suction Cup
1 * Open Repair Pentagram
2 * Open Repair Pry Tools
Get a new Phone
No display problems
No distortion pixels
No cracked LCD screens
No wrong color issues
No dead LCD
Features & Highlights
- This product is only For iPhone 7 only in Black, WOT FOR iPhone 7 Plus.
- To replace the faulty & defect LCD Display Touch Screen Digitizer Assembly. Such as the screen dose not respond properly, display problems, distortion pixels, cracked LCD screens, wrong color issues and old & dead LCD.
- Package included 1* iPhone 7 black LCD screen ,1* screen protector, 1 set* Installation Tools[As the picture shows]. Notice: Home button NOT included.
- As in the picture. Please read & understand the instructions, before starting are inspected. We will provide an after sales service to help with all your needs.
- All screens 100% Inspected by professional QC team before shipping, 180 days warranty for non-human damage.
|Model:||For Samsung Galaxy S3 SIII GT-i9300|
|Package Weight:||0.18 pounds|
|Package Size:||5.43 x 1.65 x 1.65 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Milemont, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By i DIY
mpn: 43308-1134, ean: 0751940135313,
Product Name:iPhone 7 LCD Display ScreenSuitable model:Only fit for iPhone 7Material:LCDColor:BlackFeatures:Not include HOEM button and cameraTips before installation:1.Watch video tutorial before getting start, Make sure you know all the steps.2.Che...
By Octopus Glue
NOTICE: THIS ADHESIVE IS ONLY INTENDED TO BOND THE GLASS SCREEN TO THE LCD AND/OR DIGITIZER ON A SMARTPHONE. ANY OTHER USES ARE NOT SUGGESTED OR RECOMMENDED.
Octopus Glue is compatible with all smartphone digitizers, LCDs and outer glass.
By Xfactor Hydro
mpn: UVXF10g, ean: 0805731900861,
Xfactor UV GLUE® is a premium brand in LOCA touchscreen adhesive currently on the market. Using copy and unknown LOCA adhesive leads to weak bonding and/or leaves YELLOW RESIDUE on the screen, permanently damaging your device. Only purchase Authenti...
Notice Before Installation (Profesional technician is needed for installation ) ,We strongly suggest test the item received before installation, pls don't remove protective film or tags when testing; Test steps are: clean the flex cable of screen and...
mpn: 02, ean: 0716788075559,
DescriptionThe Battery Suitable For ZTE GRAND X MAX 2 Z988 / ZTE ZMAX PRO Z981Capacity:3400mAh , Voltage: 3.8V Instructions and Tools are not included. You are advised to have a professional to do the installation. The battery must be fully recharged...
Copatible with iphone 7 Plus (5.5Inch)A1661/A1784/A1785 Package: iPhone Screen replacement Repair tools set Tempered GlassOnly compatible with iPhone 7Plus 5.5 inch (A1661/A1784/A1785), not fit for other model!. Repair/Replacing old, cracked, damage...
-Designed to be a direct drop in replacement wifi flex cable, this kit is designed with the consumer in mind. To provide an easy to use kit to replace your damaged wifi flex cable at a fraction of the cost charged at a repair facility. -The Certified...
Description: Item type: Adapter cable Packing: carton packaging Transmission rate: 10/100Mbps Bus type: USB Model: Apple to Rj45 Port type: RJ-45 Applicable network type: Ethernet Whether cross-border supply: Yes Network standard: Ethernet LED indica...
★ Delivery: 1x LCD Touch Screen Digitizer WITH FRAME + 1x tools (Double-sided adhesive is Also included); ★ All items will be 100% tested, work well before shipment; ★ Touch-screen display is free of scratches and provided with a protective fi...
By Cell Phones Parts
mpn: Cell Phones Parts, ean: 0706693668786,
Package include: 1pcs New Touch Screen Digitizer For ZTE Sonata 2 Z755. Replace your broken, faulty, cracked, damaged screen touch digitizer glass. Tool and instruction are Not included. Please Contact us before leave low stars, we will do our best t...